GeekVape Z Series Replacement Coils
5.000 KD
GeekVape Z Series Replacement Coils are mesh spares for the Zeus tank and the wider GeekVape Z family.
Why choose Z Series coils?
What sets this range apart is the 0.25ohm option and its dual mesh build. Two strips heating together bring the draw up faster on a mid wattage of 45 to 57W, while the single mesh versions take the higher end: 0.15ohm across 70 to 85W, 0.2ohm across 70 to 80W, and 0.4ohm across 50 to 60W. All four are built around a direct lung draw.
Underneath sits KA1 wire with organic cotton that re-wets quickly between pulls, keeping a long session at one pace instead of thinning out midway. Installation is a press fit from the base of the tank, with no need to strip the device down, and a box holds five coils. Compatibility is broad: the Z Zeus tank, Z SE, Z Fly, the P sub-ohm tank, Obelisk, L200, T200, Z200, S100 and Legend 5.
Have a question?
Product Information
| Type | mesh replacement coil |
|---|---|
| Brand | GeekVape |
| Series | Z |
| Coils per pack | 5 |
| Materials | KA1 wire with organic cotton |
| Installation | press fit from the base of the tank |
- 0.25ohm version uses a dual mesh build
- Pack shown is marked Z0.4 XM and Z0.2 XM, Boost version
Available Resistances
- 0.15ohm
- 0.2ohm
- 0.25ohm
- 0.4ohm
Performance
| Draw style | direct-to-lung (DTL) |
|---|---|
| 0.15ohm | 70-85W |
| 0.2ohm | 70-80W |
| 0.25ohm | 45-57W |
| 0.4ohm | 50-60W |
- Mesh and organic cotton build relays the detail of the flavour you fill
Compatible Devices
- GeekVape Z (Zeus) tank
- Z SE
- Z Fli
- P Sub-Ohm tank
- Obelisk
- L200
- T200
- Z200
- S100
- Legend 5
Storage & Use
- Prime the cotton ports before fitting and let a new coil saturate fully before the first draw
- Start at the lower end of the wattage window for the resistance, then raise it gradually
- Keep each coil sealed in its pack until it is needed
- Store in a dry place away from direct sunlight and high heat
- Replace the coil when performance drops or a burnt trace appears
Package Contents
- 5 × GeekVape Z Series mesh replacement coil









Reviews
There are no reviews yet.