GeekVape P Series Replacement Coils

5.000 KD

GeekVape P Series Replacement Coils are mesh spares for the GeekVape P Series, packed five at a time.

Why choose P Series coils?

Fitting is press-in with no threading, so a change happens where you stand: pull the spent coil, push the new one home, and the device is back where it started. Five coils to a box make up a full replacement cycle, which turns this into the pack worth keeping in a drawer rather than chasing the moment flavour starts to flatten.

The series is tuned for a direct lung draw and built from KA1 wire around organic cotton, carrying the detail of whatever flavour you fill. Four resistances are offered, each with a window it works inside: 0.15ohm between 70 and 85W, 0.2ohm between 60 and 70W, 0.4ohm between 50 and 60W, and 0.5ohm between 40 and 50W. Fitment covers the Aegis Boost Pro, Boost Pro 2, E100, E100i, B100 and Obelisk 60.

Have a question?

Product Information

Typemesh replacement coil
BrandGeekVape
SeriesP
Coils per pack5
MaterialsKA1 wire with organic cotton
Installationpress fit
  • Pack shown is marked P0.2 and P0.4

Available Resistances

  • 0.15ohm
  • 0.2ohm
  • 0.4ohm
  • 0.5ohm

Performance

Draw styledirect-to-lung (DTL)
0.15ohm70-85W
0.2ohm60-70W
0.4ohm50-60W
0.5ohm40-50W
  • Mesh and organic cotton build relays the detail of the flavour you fill

Compatible Devices

  • GeekVape Aegis Boost Pro
  • Boost Pro 2
  • E100
  • E100i
  • B100
  • Obelisk 60

Storage & Use

  • Prime the cotton ports before fitting and let a new coil saturate fully before the first draw
  • Start at the lower end of the wattage window for the resistance, then raise it gradually
  • Keep each coil sealed in its pack until it is needed
  • Store in a dry place away from direct sunlight and high heat
  • Replace the coil when performance drops or a burnt trace appears

Package Contents

  • 5 × GeekVape P Series mesh replacement coil